Merlin Motorsport: Race & Rally Parts, Equipment, Spares and Clothing

あなたのバスケット 0 チェックアウト

ログイン/登録

Back to Merlin Home Latest Q&As

Meet the experts

Steven

George

Gary

Jack

Edd

Alex

Paul

Shop

Latest Q&As - (answered by our own technical experts) plus latest Articles & Technical information

Is this Schroth Profi II ASM harness road legal?

That Schroth harness is not road legal. The correct version to be road legal is Schroth-Profi...
Read more Archived in: Racing Harness | Schroth Racing Harness | TRS harness
Is the TRS Magnum 4 Point Saloon Harness shipped with eyebolts or it is required to order them separately?

TRS Harnesses that require eye bolts will have them included in the box.
Read more Archived in: Racing Harness | Willans Harness | TRS harness
Is this FSE injection pump a suitable placement for a high pressure fuel pump for a Suzuki Swift 1.3 DDIS 06 plate?

The listing shows this as the correct pump, to confirm the original pump should have the number ...
Read more Archived in: Injection fuel pump
I have this Revotec Fan Controller fitted to my Trumph TR6. After the engine is switched off a minute or so later this thermostat kicks in and starts the fan It will run for about 6 or 7 mins which...

These Revotec Fan Controller units are adjustable so you can set the temperature with a screw on ...
Read more Archived in: radiator electric fan
Are your nine inch Race numbers MSA compliant.

Yes the black 9" numbers are MSA compliant (correct height and width).
Read more Archived in: Motorsport race numbers stick on
Please can you provide some measurements for the VDO Fuel Sender Seal - N05801432. Internal and External Diameter - PCD of bolt holes

This kit has five holes on a 54mm PCD, the outside diameter is 64mm and the ID is 43mm.
Read more Archived in: VDO gauges
What other part are needed to attach Mocal steel fittings push on to steel or copper fuel line.

If the hard line Goodridge or copper is 10mm ID you can use this Goodridge part G-HL861-06D If...
Read more Archived in: Oil systems | Goodridge hard line fuel pipe
Hi what size thread is the SPA Design pressure sensor I am looking to buy one for my rally car but need some information. I am running a Goodridge 200-06 teflon braided fuel lines with Goodridge ...

The easy way to get a sensor in would be to use this Goodridge special adaptor on one of the -6 m...
Read more Archived in: Fuel gauges
Can you supply an adaptor, sensor and oil pressure gauge for my 1.9 MI16 engine

Did you want to retain the oil pressure warning light switch? If so you will need a T piece ...
Read more Archived in: Stack gauges
Do you have a datasheet for this Race Parts temperature sender with a mapping of resistance / temperature?

This is the information we have for the Raceparts Oil temperature sender 50C - 323ohms 110C -...
Read more Archived in: Smiths Gauge