I have a Triumph Vitesse MK2 with a Girling brake master cylinder marked 0.7 will your 11/16 inch bore cylinder fit?
We do not have a vehicle listing, but the 0.7 refers to the bore, so this would be a 0.7" (11/16") bore cylinder. These Girling cylinders were used on many cars of this period. So assuming the original looks the same the Girling cylinder in our catalogue or website it should be interchangeable. There were some cylinders produced where the reservoir and the body were at an angle of about 60 degrees and we cannot supply this type. All our Girling master cylinders are at 90 angle between the resevoir and bore.
If the Girling Brafe cylinder does not look the same this would not be suitable.
7th July 2015
セキュアなショッピング
