Do Mintex MLB19 M-Series M1144 brake pads require bedding before using in a Formula Ford race car or are the ready to use on installation ? And if so how extensive and what is suggested procedure ?
Mintex advise the following Bedding Procedure for M1144 / M1155 / M1166 brake pads
1) Clean discs with brake cleaner
2) Following initial brake test start with 3 to 4 light applications from
30mph down to 0mph.
After these, follow the steps below according to Material.
M1144: 6 / 7 medium pressure applications 70mph down to 30mph
M1155: 8 / 9 medium pressure applications 90mph down to 30mph
M1166: 9 / 10 medium applications 90mph down to 30mph
When carrying out the bedding process, do not allow the brakes to drag,
do not left foot brake. To do so may result in damage to, or failure of
the brake system.
Leave the brakes to completely cool.
27th October 2015
セキュアなショッピング
