Back to Knowledge Base

I have a Stack Temperature Gauge ST3107 with a 40mm capillary bulb.

Is there enough depth in the adaptor HA32 to fit the capillary bulb? 32mm is the correct size for the hoses on the car.

Yes, that will be fine as long as you are using the red male/female adaptor with the 3/8" BSPT male thread in to the
3/8" BSP hose adaptor, you will have a pit of space after the end of the probe.

Archived in: Racetech gauges | Stack gauges | Caerbont Gauge

24th March 2025

Does the above Q&A give you the answer you were looking for?