We answer technical queries every day and provide information to help our customers find solutions to technical problems. We want to make all of this information available to everyone, so we’re pulling all together here (articles, technical specs, FAQs and Q&A sessions). This is a work in progress.
Steven 
George 
Gary 
Jack 
Edd 
Alex 
Paul 
Shop 
Yes you are correct, that is exactly as the Racparts isolator is supposed to be used.
Read more Archived in: Racetech gauges
Will OBP Remote Brake Fluid Reservoir screw on to a Tilton 76 series master cylinder?
Yes, the thread is correct, but you will need to shorten the thread on reservoir so you can screw...
Read more Archived in: Brake Master Cylinder
Yes it is a genuine VDO part it will look like the picture and the dip tube will be 170mm long.
Read more Archived in: VDO gauges
The Davis Craig controller varies the voltage to control the speed of the pump based on the tempe...
Read more Archived in: pump
Can you tell me the Outside Diameter(OD) of your 5/16" ID Cohline fuel hose No. 2122-01-0600
The Cohline fuel hose No. 2122-01-0600 has an outside diameter of 1/2 inch.
Read more Archived in: Mocal fuel hose
The Vixen aluminium weld boss is 30mm with a small step down to 28mm at the base.
Read more Archived in: oil unions
The OBP Vertical Water Header Tank is 100mm diameter and 200mm tall at the body, if you include t...
Read more Archived in: Coolnat Header Tanks
On the Merlin repackable car exhaust silencer - could you advise how is the length measured?
The length of the Merlin repack able silencer is the main body length. There is an additional 2 i...
Read more Archived in: Jetex exhausts
The centre line bend radius on 38mm CDS roll cage tubing is 150mm
Read more Archived in: Competition Car Roll Cage
Can you tell me the dimensions of the Merlin anti roll bar mounting blocks?
The 1/2" and 5/8" Merlin anti-roll bar mounting block is (WxDxH) 41mm x 30mm x 32mm with 26mm hol...
Read more Archived in: Suspension joints
セキュアなショッピング
