Merlin Motorsport: Race & Rally Parts, Equipment, Spares and Clothing

あなたのバスケット 0 チェックアウト

ログイン/登録

Back to Merlin Home Latest Q&As

Meet the experts

Steven

George

Gary

Jack

Edd

Alex

Paul

Shop

Latest Q&As - (answered by our own technical experts) plus latest Articles & Technical information

Does the Vixen weld on ally radiator neck FN-001 fit the larger style Stant lever caps.

Yes, this Vixen weld on neck will fit the car type/size Stant caps.
Read more Archived in: Coolant pipes
Can this Gates fuel hose withstand a slight bending and still retain its full diamater. I reqiure it for a 1981 Morgan as the nozzle on the tank is at a slight angle to the filler cap. Can this h...

Yes, that Gates Fuel Hose will accept a slight bend as it is reinforced with two wires which run ...
Read more Archived in: Newton flush fit fuel caps
For the OBP oil catch tank OBPCT004 can you please tell me the overall width across mounting brackets, and the separation of the mounting holes, vertically and horizontally. The application is on...

On this OBP oil catch tank the total width of the mounting bracket is 148mm, with the hole centre...
Read more Archived in: oil catch tank
What length is the fuel filler hose elbow FFH-225-45?

Each leg of the our fuel filler hose elbows have 3" of straight hose and the total length is 8 in...
Read more Archived in: Mocal fuel hose
Can you recommend a Momo Boss to fit my Lotus Elise 111R non airbag and to match up with a Snap Off quick release and Sparco steering wheel.

There is not a specific boss, but some Elise owners use a Momo Vauxhall boss, this will fit the c...
Read more Archived in: Momo steering wheel boss
Is the ITG carbon Fibre trumpet tray pre-machined or has it be machined after purchase?

The ITG trumpet trays are undrilled, you will need to cut your own holes.
Read more Archived in: Air Filters
Can you supply a Merlin repackable silencer 15 inch like the one listed but 3" diameter pipes.

Sorry we can not make custom versions of the Merlin repackable silencer. We can supply the blank ...
Read more Archived in: Jetex exhausts
Could I have the aluminium tube cut to 1.5m? Or are the only options 1m or 2m?

We would need to sell you 2m but we can cut it to 1.5 and 0.5 for you if you want.
Read more Archived in: Radiator Hose Joiners
What type of hose would you recommend for an oil breather (valve cover to catch tank) needs to be 13mm internal bore and in black if possible.

Normal oil hose would do the job. Think Mocal 1/2 inch rubber hose or FBN0800 both are black and ...
Read more Archived in: Oil cooler hose
I've been pointed in your direction by ITG. My current JC050 Megaflow (sausage type) air filter needs replacement and is of ~130mm internal height. Do you still do the 125mm internal height filte...

We keep ITG JC50 with the 125mm internal height on the shelf:
Read more Archived in: Air Filters