We answer technical queries every day and provide information to help our customers find solutions to technical problems. We want to make all of this information available to everyone, so we’re pulling all together here (articles, technical specs, FAQs and Q&A sessions). This is a work in progress.
Steven 
George 
Gary 
Jack 
Edd 
Alex 
Paul 
Shop 
What's the Outside Diameter and depth of the Vixen WF-041 weld on boss?
The OD of the Vixen weld on alloy WF-041 boss is 24mm, there is a small step at the base of this ...
Read more Archived in: oil unions
When this Mocal Tank Breather valve is installed it will allow air to breath in both directions t...
Read more Archived in: Roll over fuel tank valves
The bezel on the Mocal Pressure Gauge is just held on with three bent little tags so it will be e...
Read more Archived in: Caerbont Gauge
What size spanner is needed for the Merlin 6 point K type nut M10. K-NUT-M10
An M10 K Nut takes a 12mm spanner.
Read more Archived in: dzus fasteners
Merlin Motorsport manufacture the mufflers. They are 4 inchs in diameter and 8 inches long. The M...
Read more Archived in: Jetex exhausts
The total width of the Merlin 7/8th inch Roll Bar Mount is 49mm the hole centres are at 33mm.
Read more Archived in: Suspension joints
What is the weight of the Sparco Sprint seat 8231?
The Sparco Sprint seat weighs 9kg.
Read more Archived in: Competition seats
Is this 3/4 inch Girling Master Cylinder for Brake or Clutch, I am looking for two for Brakes.
A Girling master cylinder can be used for brake or clutch as long as you are happy that bore size...
Read more Archived in: Brake Master Cylinder
Yes, the rating for that Faulkner Race spring would be 100lbs per inch. A spring of that length a...
Read more Archived in: Racing springs
Are any of your Mocal or Setrab oil coolers suitable for fuel cooling?
Yes all Mocal and Setrab coolers are suitable for fuel. The mocal coolers are some times used to ...
Read more Archived in: Mocal Oil Pump | VDO oil pump
セキュアなショッピング
